The X10/Dasher tab of the Simple mode of the Light-O-Rama Network Preferences program enables you to configure a Dasher network and/or an X10 network. Most Light-O-Rama users will not have need for these optional networks.
The X10/Dasher tab
X10 Port ("X10")
If you are using any X10 controllers, they must be hooked up to your computer using their own exclusive serial port, and that port should be specified here.
Make sure that the selected port does not conflict with any Light-O-Rama networks, the Dasher port, or any DMX universes.
If you are not using X10 controllers, set this port to "(None)".
Dasher Port
If you are using any Dasher controllers, they must be hooked up to your computer using their own exclusive serial port, and that port should be specified here.
Make sure that the selected port does not conflict with any Light-O-Rama networks, the X10 port, or any DMX universes.
If you are not using Dasher controllers, set this port to "(None)".