Using the mouse in the Pixel Editor's sequencing grid, you can:
•Click on a single cell to select it. If the cell has an effect in it, that effect starts playing in the right window and the effect becomes the current effect (text description is listed below the Effect Generator button).
•Select multiple cells by clicking on a cell and then dragging the mouse across the range.
•Extend the selection by shift-clicking on a cell.
•Double-clicking on an effect will select all of the cells for that effect, then open the Effect Generator so the effect can be edited. In the following picture, one of the cells in the second row was double-clicked, causing all of the cells for that effect to be selected (including the ramp up and ramp down portions).
What happens when any of the above actions takes place depends on which tool is selected:
Select – no effect is applied to the selected cells
On – will apply the current effect, as listed below the Effect Generator button, to the selected cells. The effect is applied at 100%.
Off – will remove any effects in the selected cells
Fade Up – will apply the current effect, as listed below the Effect Generator button, to the selected cells. The effect is ramped up from 0% at left-most selected cell to 100% at the right.
Fade Down – will apply the current effect, as listed below the Effect Generator button, to the selected cells. The effect is ramped down from 100% at left-most selected cell to 0% at the right.