32: Channel in tracks of conflicting length |
Top Previous Next |
|
Message Number: 32 Severity: Warning Summary: Channel in tracks of conflicting length Details #1: The sequence that the channel is in Details #2: The name of the channel Details #3: A track that the channel is in Details #4: Another track that the channel is in
One of your scheduled sequences contains a channel which is in two different tracks, but those tracks are of different lengths. For example, one track is a minute long, while the other is two minutes long.
This will likely cause the lights hooked up to that channel to behave in a way that you don't expect, as different lighting effects from different parts of the same channel could be sent to the lights in an order that you were not expecting.
Unless you have done this intentionally, and understand the way that your lights will behave because of this, consider using the Sequence Editor to either remove the channel from one of the tracks or to change the tracks to be of the same length.
|