|
After purchasing Cosmic Color Ribbons, you must configure them using the Light-O-Rama Hardware Utility. There are instructions on how to do this in the manual that comes with the ribbons. You will assign a unit ID to each controller, the same as you would with any other controller.
In addition, the Hardware Utility has a Cosmic Color Ribbon Configuration screen. Be sure to use the following settings on it:
| • | Unit ID Mode: Normal (single ID). |
| • | Channel Mode: Triples (RGB, RGB, ...) |
| • | DMX Mode: Both macro and RGB channels |
The "Standalone Speed" setting does not matter with respect to the Light-O-Rama SuperStar Sequencer.
|