Configure Controller Unit IDs Using the Light-O-Rama Hardware Utility

Top  Previous  Next

After purchasing Cosmic Color Ribbons, you must configure them using the Light-O-Rama Hardware Utility.  There are instructions on how to do this in the manual that comes with the ribbons.  You will assign a unit ID to each controller, the same as you would with any other controller.

 

In addition, the Hardware Utility has a Cosmic Color Ribbon Configuration screen.  Be sure to use the following settings on it:

 

Unit ID Mode: Normal (single ID).
Channel Mode: Triples (RGB, RGB, ...)
Resolution: 50 pixels
Strips: 1
DMX Mode: Both macro and RGB channels

 

The "Standalone Speed" setting does not matter with respect to the Light-O-Rama SuperStar Sequencer.