Channel Assignment Wizard: CCR Fixtures

Top  Previous  Next

The Light-O-Rama Visualizer's Channel Assignment Wizard for CCR fixtures is a simple, one-step process that repeats for each CCR assigned to a prop.

 

For each CCR assigned to a prop, the CCR settings dialog is presented, which allows you to set the most important parameters of each CCR:

 

Physical Starting Pixel Number
Network
Base Unit ID
Unit ID Mode
Channel Mode
Resolution

 

ChannelWizardCCR

The Visualizer's Channel Assignment Wizard when used for CCR fixtures

 

Physical Starting Pixel Number

 

CCR fixtures can be split apart into separate entities.  The fixture with a particular address with pixel #1 is considered the master, and any others the slaves.

 

Network

 

The network this CCR is part of.

 

Base Unit ID

 

The unit ID of this CCR.  For every CCR assigned after the first one, the system will attempt to guess the next unit ID to be used.  You should check and change it as needed.

 

Unit ID Mode

 

Normal (one unit per CCR) or legacy (ten units per CCR).

 

Channel Mode

 

If the channels are in triplet (RGB) order or sequential order.

 

Resolution

 

The logical resolution this CCR is running at.